Motorcycle Repair: Changing the Primary Chaincase Oil on a 2008 Harley Davidson Road Glide

**Always follow the instructions in your repair manual when doing repair or maintenance work on a motorcycle. Manuals can be found at the dealer and online.** This video is about changing the Primary Chaincase Lubricant or Oil on a 2008 Harley Davidson Road Glide. The oil used is 20W-50 Harley Davidson Syn3, and is their fully synthetic oil. I think it is manufactured by Sunoco for Harley Davidson. Harley Davidson sells one other type of oil for the chaincase on this motorcycle, and is Harley Davidson Formula+ Transmission and Primary Chaincase Lubricant and is not a synthetic oil. Tools Used: – 5/16″ Allen Wrench to remove the passenger foot board – 5/8″ Socket for the Primary Chaincase Drain Plug – T27 Torx Driver for the Torx Screws that fasten the Clutch Inspection Cover – Torque Wrench Specifications: – Torx Screws for Clutch Inspection Cover should be tightened to 84-108 in.-lbs – Drain Plug should be tightened to 14-21 ft.-lbs – Harley Davidson Gasket Service Kit Part #17369-06
Video Rating: 5 / 5

9 Responses to “Motorcycle Repair: Changing the Primary Chaincase Oil on a 2008 Harley Davidson Road Glide”

  1. smallengineshop says:

    @bobhall1975 Your Welcome! Glad you enjoyed the video.

  2. bobhall1975 says:

    hey, thanks a lot!! Ive been meaning ton get this done for WAY to long!! Just changed my oil, n im fixin to change tranny n primary fluid. Honestly this was a lil intimidating to me but after watching this it seems that bringing fluid up to temps gonna take longer!! Thanks again!!

  3. smallengineshop says:

    @watchmartinbastin Thanks

  4. watchmartinbastin says:

    I like this video…straight to the point.

  5. harleydman08 says:

    yes I have the manual book darn I overlooked the pages yeah I see it okay I got it. of course I’m gonng buy me a torque wrench. thanks for big help.

  6. smallengineshop says:

    @harleydman08 For this bike the clutch inspection cover should be tightened to 84-108 in. lbs. I would recommend getting a repair manual for your motorcycle and following the instructions. If you plan to do all the maintenance work yourself, than a torque wrench is a good investment.

  7. harleydman08 says:

    I got the idea what you do while changing the primary oil on the video. since I’m deaf I dont know what were you saying about the instruction are… so Its will my first time to do it myself. question is I dont have the torque tool can I feel by tighten when put the plate back on? if not then maybe I’ll buy the torque tool and what torque tighten supposed to be?
    thanks harleyd man

  8. smallengineshop says:

    @aso432keno Your Welcome! Thank you for watching.

  9. aso432keno says:

    Thanks again for a great video.

© 2015 Used Motor Cycle Sale. All rights reserved.
FreshLife WP Theme Proudly designed by Theme Junkie.
freshlife WordPress Themes Theme Junkie